top of page
Testing services and prices for fuel, waste products and other samples
Prices that are the same for all sample types
#
Code
Parameters to be tested and/or type of work
Standard
(or another document describing the method)
Price (EUR; VAT not included)
1
2
A
Sample registration and 7 day storage, documentation, sending of the test results. Test results and invoices are sent via e-mail as a digitally signed PDF files. (Applied to each sample)
Ash content (at T=550 °C or at T=815 °C; can be ordered only together with moisture content determination (M))
LVS EN ISO/IEC 17025
LVS EN ISO 18122
9,84
13,12
3
4
5
V
Q
DU
Volatile matters content (can be ordered only together with moisture content determination (M))
Gross and Net calorific values (can be ordered only together with moisture content determination (M))
Mechanical durability of heat pellets
LVS EN ISO 18123
EN ISO 18125
* LVS EN ISO 17831-1
16,40
47,00
27,33
6
7
8
F
Wet
AFT
Fines content in the total sample mass (<3,15 mm or other size; price per fraction; surcharge EUR 2,00 for each kilogram of sample above 6kg)
Particle size distribution of disintegrated pellets (Wet Sieve analysis)
Ash melting behaviour in oxidizing atmosphere
* LVS EN ISO 5370
LVS EN ISO 17830
14,21
28,42
LVS CEN/TS 15370-1
36,69
9
10
D
L
1
Diameter of pellets (average)
Length of pellets (content of pellets with length more than 40/45/50 and/or max. length
LVS EN ISO 17829
LVS EN ISO 17829
6,56
14,00
11
12
13
14
L
2
Fl
N
0
15
CH
16
17
SCl
T1
18
T2
Fluorine (F) content
Nitrogen (N) content
Oxygen (O) content. Should be ordered together with tests with codes CHN, SCl and A.
Length of pellets (average and distribution within intervals)
Carbon (C), Hydrogen (H) content. Determined together and can be ordered only together.
Sulfur (S) content and Determined together and can be ordered only together.
Chlorine (Cl) content.
Content of heavy metals As, Cd, Cr, Cu, Hg, Ni, Pb, Zn (arsenic, cadmium, chrome, copper, mercury, nickel, lead and zinc)
Content of elements: Al, Ca, Fe, K, Mg, Mn, Na, P, Si, Ti (aluminum, calcium, iron, potassium, magnesium, manganese, sodium, phosphorus, silicon and titanium)
* LVS EN ISO 16994
* LVS EN 13342
LVS EN ISO 16993
LVS EN ISO 17829
25,14
36,07
5,00
19,67
LVS EN ISO 16948
60,12
LVS EN ISO 16994
ISO/TS 16996
LVS EN 15309
43,72
LVS EN ISO 16968
ISO/TS 16996
LVS EN 15309
ISO/TS 16996
LVS EN 15309
56,84
56,84
Set codes and prices (EUR; test prices in sets are lower than when ordering them separately)
K1
88,53
K2
101,65
K3
115,86
19
T3
Enlargement of the T1 test with content determination of Br, I, Se un Tl or enlargement of the T2 test with content determination of Ba, Co, Mo, Sb, Sn un V or enlargement of the respective tests (T1 or T2) by determining content of up to any 6 elements with periodic system numbers from 21 līdz 92 (according to client request). Can be ordered only together with corresponding T1 and/or T2 tests.
LVS EN ISO 16968
ISO/TS 16996
LVS EN 15309
10,93
10,93
20
TO
21
TS
22
BO
Expression of the results of the T2 test in form of oxydes (Al2O3, CaO, Fe2O3, K2O, MgO, MnO, Na2O, P2O5, SiO2 un TiO2)
Sand content in the ash (determined and calculated as sum of contents of SiO2 un Al2O3)
* LVS EN 15309
43,72
* ISO 734
37,16
Biomass oil residue content (for example, in husk pellet) determination by extraction
23
Cs
Determination of the specific radioactivity of the nuclide 137Cs - Cesium 137 (in accordance of both - the indicated standard and the rules of the cabinet of ministers of the republic of Latvia # 576; should be ordered together with M)
LVS EN ISO
19581
24
BC
Biomass content in SRF (Solid Recovered Fuel). Expressed as percentage of biogenic carbon in total carbon. Selective dissolution method. Suitable mainly for the coarse/rough fraction.
LVS EN ISO 21644
31,70
66.00
25
WM
Waste composition / morphology% (usually only for coarse/rough fraction; for samples up to 10 kg; manual method)
LVS EN ISO 21644
103.00
26
SS
Loose matter content % (including sieving and drying), in accordance with Cabinet of Ministers Regulations No. 571 (issued 13.09.2022).
* ISO 6439
63.00
27
KK
Determination of the quality indicators listed in Cabinet Regulation No. 571 (issued on 13.09.2022) for technical compost (including SS).
28
Ph
Phenol (Ph) content
* ISO 6439
336,00
25,14
29
TDS
Total dissolved solids content (TDS)
LVS EN ISO 15216; LVS EN ISO 12457-1
28,42
30
pH
pH (potential of Hydrogen)
LVS EN 13037
11,00
31
EC
32
LT
Electrical conductivity
Leaching test in accordance with the "Regulations of Waste Landfills" (Regulations No. 1032) and corresponding standards
* LVS EN 13037
11,00
156,00
from 26,00
33
Upd
Making editorial corrections to the test report, invoice etc.(e.g. changing the Customer's reference or other information provided by the Customer) and reissuing it according to client request. Preparation/approval of a deed of transfer.
LVS EN 12457-1 LVS EN 12457-2
Prices, which may vary depending on the type or characteristics of the sample
#
Code
Parameters to be tested and/or kind of work
Standard
Price (EUR; VAT not included)
Heat pellet
Heat briquette
1
SP
Preparation of a sample for testing [may not be necessary; prices are approximate, correspond to statistically average sample - applied as necessary, depending on the particular sample];
Proportionality provision
LVS EN ISO 14780
9,84
12,02
Wood chips, ash
Waste products (incl. SRF)
Waste products (incl. SRF)
2
SM
Manual shredding (up to 5 min.)
6,56
6,56
9,84
3
SS
Milling with laboratory equipment (for each 150g)
17,49
17,49
28,42
4
SH
Homogenization
9,84
9,84
12,02
5
SD
Drying (for each 500g of sample)
LVS EN ISO 18134
6,56
6,56
9,84
14,21
6
SA
Ashing (for each 500g of sample)
LVS EN ISO 18122
9,84
9,84
12,02
14,21
7
SC
Combustion in a closed vessel
LVS EN ISO16994
12,02
12,02
12,02
12,02
8
Dry1
Particle size distribution for uncompressed fuels (Dry Sieve test; several sieve/hole sizes available; F is included when Dry2 is ordered)
Price for each 1000g of particles with sizes up to 63mm
LVS EN ISO 17827-1
14,21
25,14
25,14
9
Dry2
Price for each 300g of particles with sizes up to 3,15mm
LVS EN ISO 17827-2
25,14
25,14
10
M
Moisture content
LVS EN ISO 18134
10,93
10,93
21,86
21,86
11
BD
Bulk density
* LVS EN ISO 17828-1
6,56
12,02
14,21
12
BD
Bulk density
* LVS EN ISO 17828-2
8,74
13
ρ
Density
* ISO 18847
8,74
Notices:
* - The method is not accredited (if text in the column "Standard" begins with an asterisk - "*")
-- When the parameters of calorific value (Q), volatile matter (V), ash content (A) or radioactivity (Cs) as well as any parameters for "Dry material" are ordered, the determination of moisture content (M) is also required and is added to such orders
-- Delivery time for testing results depend on the backlog and is usually 2 to 5 working days. Rush orders possible.
-- Testing options always depend on the characteristics of the sample.
-- Prices are given excluding VAT; VAT not applicable for orders placed outside Latvia
–- Preparation of the sample for testing (codes in pricelist:
SP;SM;SS;SH;SD;SA;SC, as well as Dry1) are included in the order by the laboratory as needed.
Last update: 23.07.2025.
bottom of page